FTTH Fiber Optic SC/UPC Hot Melt Fast Connector optic fiber machine fast connector
Model:SC/UPC
Place of Origin:ShenZhen,China
Quick Detail:
● Field-termination connector with no epoxy or polishing required
● No matching gel enables low reflection and high reliability
● Splicing point is inside of the connector. No additional splicing
work required
● Easily assembled with one-touch, push-pull system
● Used for φ3.0mm,φ2.0mm cable and 3x2mm drop cable etc
● The fusion splice position can be protected by the heat
shrinkable tube inside, not easy broken
Description
This kind of Fusion Splice-on Connector is actually an optical
fiber fusion, however the welding point is in the inner end of
connector, which makes it no necessary for extra protection
equipment, such as fiber protection plate(optical fiber splice
tray), optical fiber terminal box, optical fiber distribution
frame, after it finished splice fusion. The factory pre-polished
ferrule eliminates the need for polishing, adhesives, and crimping
in the field, which minimizes the potential for operator error and
expensive connector scrap. Compared to mechanical optical fast
connector, this new practical connector save V-groove mechanical
connector maintenance and can improve the span life of welding
point of connector and reduce maintenance cost.
Specifications
| parameter | SC Connector |
| SM | MM |
| PC | UPC | APC | PC/UPC |
| Insertion loss | ≤0.3dB | ≤0.3dB | ≤0.3dB | ≤0.3dB |
| Return loss | ≥50dB | ≥50dB | ≥50dB | / |
| operating wavelength | 1310nm, 1550nm | 850nm, 1300nm |
| Ferrule Concentricity | ≤1um | ≤4um |
Applications
1. Fiber optic equipment
2. Fiber optic communication system
3. FTTH optic fiber terminal connection
4. Optical access network
5. Fiber optic data transmission
6. CATV
7. Central office connector replacement
8. Data center installation
